---

41 Propeller Shaft

• 41-050 - Removal and installation of propeller shaft
  • Select page... A. Models 107, 116 B. Models 114, 115 C. Model 123 D. Model 124 E. Model 126 F. Model 201
• 41-060 - Removal and installation of propeller shaft front axle on 4MATIC
• 41-080 - Balancing rear propeller shaft on model 124
• 41-085 - Measuring propeller shaft alignment with mechanical propeller shaft articulation angle meter
• 41-100 - Removal and installation of propeller shaft intermediate bearing renewing of grooved ball bearing
  • Select page... A. Models 107, 114, 115, 116, 123 B. Model 126 C. Models 124, 129, 201
• 41-200 - Renewing centering sleeve
  • Select page... A. Models 114, 115, 116, 123 as well as models 107 and 126 up to 08/85 B. Models 107 and 126 starting 09/85 C. Models 124, 201
• Programmed repairs - Propeller shaft
  • Select complaint... Humming at decel, speed range from 120 km/h to 90 km/h, Model 116 w/ M110. Acceleration juddering in the speed range of 15-20 km/h or 30-50 km/h, Model 114/115 and 116.02. Humming noises with rough spots in the speed range between 100 and 160 km/h, Model 124. Intermittent humming (interference) in the speed range between 160-180 km/h, Model 124.023/.083. Drive line vibrations in overrun conditions from higher speeds. Leakage at the rear transmission cover. fracture of exhaust pipes. Wear at the front flexible coupling. Rumbling/rattling in the no-load condition in the engine speed range between 3200-3800 rpm, Model 201. Vibration or booming complaints on vehicles with dual-mass flywheel. Booming (rumbling) in the speed range from 110 km/h to 150 km/h.

---