05 Engine, Camshaft and Valve Train - M103
- 05-2110 - Checking and replacing hydraulic valve clearance compensating elements
- 05-2130 - Checking basic position of hydraulic compensating elements
- 05-2140 - Adjusting basic setting of hydraulic compensating elements
- 05-2150 - Checking camshaft timing
- 05-2152 - Adjusting camshaft timing
- 05-2170 - Removing and installing driver on camshaft
- 05-2190 - Removing and installing rocker arm bearing bracket
- 05-2200 - Removing and installing camshaft
- 05-2218 - Replacing threaded bush in front of camshaft
- 05-2220 - Replacing end cap in rear of camshaft
- 05-2230 - Checking basic position of camshaft
- 05-2240 - Adjusting basic position of camshaft
- 05-2320 - Removing and installing rocker arms
- 05-2500 - Removing and installing valve springs
- 05-2600 - Checking valve springs
- 05-2700 - Replacing valve stem seals
- 05-2845 - Checking valve guides
- 05-2850 - Replacing valve guides
- 05-2895 - Checking valves
- 05-2900 - Replacing valve seats rings
- 05-2910 - Machine valve seat rings
- 05-3100 - Removing and installing chain tensioner
- 05-3200 - Replacing timing chain
- 05-3300 - Removing and installing tensioning rail
- 05-3350 - Removing and installing guide rail
- 05-4600 - Removing and installing crankshaft gear
©Copyright 2003 Steve Nervig
All Rights Reserved